FOX Offroad Shocks Shock Absorber 24-On Front for 2024-2026 Toyota Tacoma

The FOX Factory Race 3.0 Internal Bypass front coilover is built specifically for the 2024–2026 Toyota Tacoma running an Upper Control Arm setup with 2–3 inches of lift. This is not a generic coilover with a compatibility note — it is valved and tuned for this exact application at that lift height.

The internal bypass is the defining technology. Position-sensitive bypass zones allow the shock to move freely through mid-stroke for compliance over washboard and rough terrain, then progressively firm up near full compression where control matters most. That behavior is engineered in — not dialed in after the fact.

The dual-speed compression adjuster gives independent control over two damping circuits. Low-speed handles body roll and steering inputs; high-speed manages square-edge hits and hard landings. You can tune one without sacrificing the other. The aluminum body and external reservoir expand oil volume and shed heat faster than steel alternatives, keeping damping consistent on extended high-speed runs where thermal fade becomes a real problem.

This kit comes as a pair. We recommend it for builders who have committed to the 2–3 inch lift range and want front damping hardware matched specifically to that setup — not a shock that approximates it. For the 2024–2026 Tacoma driven hard in demanding terrain, this coilover delivers the damping precision and thermal durability to back it up.