ICON Vehicle Dynamics 2.5 VS Extended Travel Coilover Kit with Internal Reservoir
BRAND: ICON Vehicle Dynamics
Check it fits your Tacoma
This part fits
Product Description
The ICON Vehicle Dynamics V.S. 2.5 Series Extended Travel Coilover Kit is a front suspension upgrade built specifically for the 2005–2023 Toyota Tacoma. The 2.5" shock body and increased piston area over stock components maximize available wheel travel, while vehicle-specific valving delivers controlled, composed ride quality on- and off-road. Lift height adjustability runs 0–3.5" on 2005–2015 models and 0–2.75" on 2016–2023 models — TRD Pro variants on 2017–2023 Tacomas are limited to 0–1.25" over stock.
This kit delivers 5.16" of travel length, a CAD-plated steel shock body with a 7/8" diameter shaft, FK Rod End bearings, and ICON-engineered coil springs backed by a lifetime warranty against sagging or breakage. The digressive valving profile keeps low-speed body roll in check without sacrificing compliance at higher speeds. The design is fully rebuildable and revalveable.
A few things to plan for before ordering: these are extended-travel coilovers, so aftermarket front upper control arms are required — they will not work with OEM arms. Up to 33"x11.50" tires fit with minor fender trimming; 0mm offset aftermarket wheels are recommended. 2018–2023 Tacomas require ADAS recalibration after install. This kit does not fit 2WD Tacomas with 5 lug wheel studs.
For balanced front-to-rear performance, we recommend pairing this kit with ICON 2.0 or 2.5 Aluminum Series rear shocks.
Specifications
| Material | Aluminum |
| Assembled | Yes |
| Active Or Passive Suspension | Passive |
| Adjustable Compression | No |
| Adjustable Damping | No |
| Adjustable Rebound | No |
| Adjustable Ride Height | Yes |
| Body Diameter | 2.5 Inch |
| Coil Over Springs Included | Yes |
| Compressed Length | 17.42 |
| Cylinder Color | Silver |
| Cylinder Finish | Cadmium Plated |
| Cylinder Material | Steel |
| Damping Type | Oil |
| Dust Shield Included | No |
| Extended Length | 22.57 |
| Front Spring Rate | 650 Inch |
| Gas Charged | Yes |
| Grade Type | Performance |
| Includes Bump Stop | No |
| Internal Construction Type | Single Tube |
| Lower Mount Type | Eyelet |
| Maximum Lift | 3.5 Inch |
| Maximum Ride Height Raising Distance | 3.5 |
| Minimum Lift | 0.0 Inch |
| Oem Wheels & Tires Fitment | Yes |
| Remote Reservoir | No |
| Reservoir Style | Internal |
| Self Leveling | No |
| Shaft Diameter | 0.875 |
| Shock Absorber Body End Measuring Point | Top Of Upper Mount Plate |
| Shock Absorber Rod End Measuring Point | Center Of Eylet |
| Spring Color | Black |
| Spring Material | Steel |
| Spring Rate Type | Linear |
| Travel Length | 5.16 |
| Upper Mount Type | Mounting Plate |
| Valving Type | Digressive |
Shipping
- Secure checkout powered by Shopify
- Free shipping over $50 (excludes LTL products)
- Returns accepted within 30 days