ICON Vehicle Dynamics 1.5 Inch Add-A-Leaf Kit for 1995-2023 Toyota Tacoma

This ICON Vehicle Dynamics 1.5" Add-A-Leaf Kit delivers 1.5 inches of rear lift on the 1996–2023 Toyota Tacoma by replacing the factory overload leaves with a three-leaf, progressive-rate steel pack. The progressive design drops the rear spring rate approximately 10%, which trades that stiff overload-spring feel for a more compliant ride on near stock weight trucks.

The kit ships complete with U-bolts and center pins — all the hardware needed for a straightforward install using a socket wrench, torque wrench, and cut-off wheel. Leaf springs carry a lifetime guarantee. Tire clearance runs up to 33x11.50 inches, and 0mm offset aftermarket wheels are recommended to maintain proper rear-end geometry.

A few fitment notes worth knowing before you order: 2WD Tacomas with 5-lug wheels are not compatible. TRD Pro models (2017–2023) will net approximately 1 inch of rear lift rather than 1.5 inches due to their taller factory springs. On 2018–2023 Tacomas, ADAS recalibration is required after install. This kit is sized for near stock weight configurations — if your Taco is running heavier equipment or a significant payload, ICON's Multi-Rate Rear Leaf Springs (part number 158505) are the more appropriate call for 2005–2023 trucks.