ICON / Delta Joint Retrofit Hardware Kit for 1995-2004 Toyota Tacoma

The ICON Delta Joint Retrofit Hardware Kit (614526) solves a specific taper mismatch on 1995–2004 Toyota Tacoma spindles. The factory spindle isn't cut to accept the ball joint taper that ICON Delta Joints require — this kit adapts that interface so a Delta Joint seats correctly inside an existing set of uniball upper control arms.

We like that ICON engineered this as a no-press install with all mounting hardware included. No additional shop time, no chasing down a press — the hardware in the box handles it. Steel construction with zinc plating keeps corrosion resistance solid without overcomplicating the part.

Fitment splits into two paths depending on your UCAs. Running ICON front upper control arms? You'll also need Delta Joint Retrofit Kit part number 614550. Running non-ICON uniball UCAs? Those need to feature industry-standard 1 in uniballs with 2.125 in OD and 1 in height, and you'll pair this kit with part number 614560 instead. Make sure you order the correct companion kit for your setup before starting the build.

Fits 1995–2004 Toyota Tacoma (Base, DLX, SR5, Pre Runner, and Limited trims) on 4WD and applicable non-4WD configurations. If a taper mismatch is holding up your Delta Joint retrofit, this is the hardware that resolves it at the spindle.